Symphony Interior Clear Coat

Symphony Logo
Symphony Product
  • – Enhances natural wood grain
  • – Smooth finish makes walls easy to clean
  • – Use alone or over High Sierra or Sashco’s Capture Log Stain
  • – Use on all vertical wood surfaces
  • – Water-based – easy to apply and clean up
  • – Freeze-thaw stable
Applications
  • New Wood

    If you’ve decided to keep your logs natural looking and only want to apply Symphony to bare wood, best results are obtained if you sand the wood to a smooth finish with fine sandpaper. Be certain to remove all dust before finishing. Do not use steel wool; it may cause rust stains. For a smoother finish, sand between coats.

  • Finished Wood

    Compatibility is a huge issue, so logs that already have some type of stain or sealer on them will need to be tested for compatibility; call us and we will talk you through the testing procedure. For best adhesion to non-Sashco coatings, it is usually best to lightly sand the surface before applying Symphony. Old finishes may need to be mechanically removed if a lighter appearance is desired.

  • Dilution/Stirring

    Do not dilute. Stir thoroughly before using. Do not shake as this will cause foaming.

  • Application Methods

    Brush or spray on two or more coats. More coats will impart a higher sheen. If brushing, use a high-quality synthetic bristle brush, such as Purdy® brand. Back brushing after spraying will enhance penetration into the wood surface. Brush material in the direction of the grain. Do not over-brush (bubbles can form). Sand between coats for a smoother finish.

  • Dry Time

    Symphony will dry to touch in one hour and can be sanded after two hours (when the air is warm and dry). Recoating can be done after 1-2 hours. Allow wood that will be handled to dry overnight. Actual dry time depends on thickness of coats, temperature and humidity.

Technical Data
  • Sheen Levels

    Gloss, Satin

  • Packaging

    1-gallon and 5-gallon plastic pails

  • pH

    8-9

  • Viscosity

    400-600 cps @ 60 rpm with #3 spindle

  • VOC

    Less than 250 g/L

  • Solids

    23%

  • Density

    (wt/gal) 8-9 pounds/gallon